↓ Skip to main content
What is this page? Embed badge

TMS 2022 151st Annual Meeting

Overview of attention for book
Cover of 'TMS 2022 151st Annual Meeting & Exhibition Supplemental Proceedings'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 Comprehensive Recovery of Oxygen Pressure Acid Leaching Residue of Zinc Sulfide Concentrate
  3. Altmetric Badge
    Chapter 2 Effect of Laser Heat Treatment and Nitrogen Content in Shielding Gas on Precipitation of Widmanstätten Austenite in Lap Laser Welds of Duplex Stainless Steels
  4. Altmetric Badge
    Chapter 3 Influence of M-EMS Parameters on Flow Characteristics in a Bloom Mold
  5. Altmetric Badge
    Chapter 4 Numerical and Physical Simulations of Bottom Blowing Process Optimization of 120t Refining Ladle
  6. Altmetric Badge
    Chapter 5 Parametric Study of Mold Electromagnetic Stirring: Effects of Load Condition and Copper Resistivity
  7. Altmetric Badge
    Chapter 6 Phase and Microstructural Analysis of In-Situ Derived Alumina-TiB 2 Composites
  8. Altmetric Badge
    Chapter 7 Phase Equilibria in the Ag–Ge–Bi–Te System and Thermodynamic Properties of the n GeTe• m Bi 2 Te 3 ( n , m  = 1–4) Layered Compounds
  9. Altmetric Badge
    Chapter 8 Potentiostatic Electrodeposition of Ti–Al Alloy with 40% Titanium from the Lewis Acidic 1-Butyl-3-Methylimidazolium Chloride-Aluminum Chloride Ionic Liquid Electrolyte
  10. Altmetric Badge
    Chapter 9 Prediction of Distribution of Composition of Inclusion in Continuous Casting Bloom of the Heavy Rail Steel Coupling Element Segregation, Heat Transfer, and Kinetics
  11. Altmetric Badge
    Chapter 10 Strategies for the Upgrade of a TBZC Product (Tetra Basic Zinc Chloride) by Selective Removal of the Impurity Chlorine
  12. Altmetric Badge
    Chapter 11 Study of γ′-F 4 N Annealing Process Through Molecular Dynamics Modeling
  13. Altmetric Badge
    Chapter 12 Raman and Transport Characterization of Semiconducting and Superconducting Selenide-Based Transition Metal Dichalcogenides
  14. Altmetric Badge
    Chapter 13 Synthesis and Characterization of MnCo 2 O 4 -GQDs Nano-composites for Supercapacitor Electrodes
  15. Altmetric Badge
    Chapter 14 Effect of Post Heat Treatment on Fatigue Strength of AlSi10Mg Produced by Laser Powder Bed Fusion Process
  16. Altmetric Badge
    Chapter 15 Effect of Surface Roughness on Fatigue Behavior of 316L Stainless Steel Produced by Binder Jetting Process
  17. Altmetric Badge
    Chapter 16 High Strain Rate Deformation of EBM-Ti–6Al–4V: Microstructure, Texture, Mechanical Properties, Fracture Surface, and Deformation Mechanism
  18. Altmetric Badge
    Chapter 17 Machining Versus Heat Treatment in Additive Manufacturing of Ti6Al4V Alloy
  19. Altmetric Badge
    Chapter 18 The Study on Microstructural Evolution During Post-processing of Additively Manufactured Ti64
  20. Altmetric Badge
    Chapter 19 3D Printing Energetics for Gun Propulsion Technology
  21. Altmetric Badge
    Chapter 20 Residual Stress, Microstructure, and Characterization of Self-Mated Additive Repair of Inconel 718 Alloy Using Cold Spray Process
  22. Altmetric Badge
    Chapter 21 Reverse Engineering of Aerospace Components Utilizing Additive Manufacturing Technology
  23. Altmetric Badge
    Chapter 22 Laser Metal Deposition of Nickel Silicide on S355 Structural Steel
  24. Altmetric Badge
    Chapter 23 Refractory Metals—Some Historical Observations
  25. Altmetric Badge
    Chapter 24 Microstructure Evolution and Mechanical Properties of Friction Stir Metal Deposited SS304
  26. Altmetric Badge
    Chapter 25 A 3D Multiple-Slip Crystal-Plasticity Model for Precipitate Hardening in Additively Manufactured High Strength Steels
  27. Altmetric Badge
    Chapter 26 Development of Al-Cu-Mg and Al-Mg-Si-Zr Alloys with Improved L-PBF Processability
  28. Altmetric Badge
    Chapter 27 Effect of Hot Isostatic Pressing on the Microstructure of Directionally Solidified Nickel Alloy After SLM
  29. Altmetric Badge
    Chapter 28 Functionally Graded Alloys from 316 Stainless Steel to Inconel 718 by Powder-Based Laser Direct Energy Deposition
  30. Altmetric Badge
    Chapter 29 In-Situ LENS Fabricated Ti–Al–Si Alloy Phase Transformation and Microstructural Evolution After Isothermal Annealing Heat Treatments
  31. Altmetric Badge
    Chapter 30 In-Air Polymerization and Crosslinking of Monomers During Electrospray Deposition
  32. Altmetric Badge
    Chapter 31 Incorporation of Metallic Nanoparticles Into Alkyd Resin: A Review of Their Coating Performance
  33. Altmetric Badge
    Chapter 32 Materials for Antireflection Coatings in Photovoltaics—An Overview
  34. Altmetric Badge
    Chapter 33 Nanostructured Graphene Thin Films: A Brief Review of Their Fabrication Techniques and Corrosion Protective Performance
  35. Altmetric Badge
    Chapter 34 Numerical Study of Intrinsic Stresses in Perovskite-on-Si Solar Cells with Intermetallic Bonding
  36. Altmetric Badge
    Chapter 35 Custom-Designed Miniature-Coil Winding/Wrapping Machine
  37. Altmetric Badge
    Chapter 36 Effect of Hot Band Annealing and Final Annealing Temperatures on the Texture, Grain Size, and Magnetic Properties of 1.2 wt% Si Non-oriented Electrical Steel
  38. Altmetric Badge
    Chapter 37 Magneto-Mechanical Properties and Magnetocaloric Behaviour of Rapidly Solidified Melt-Spun Ni 50 Mn 28 Ga 22 Heusler Alloy
  39. Altmetric Badge
    Chapter 38 Characterization of AlCl 3 -Urea Electrolyte for Speciation, Conductivity, and Electrochemical Stability and Its Application in Al-Ion Batteries
  40. Altmetric Badge
    Chapter 39 Multi-layered Thin-Film Metal Contacts for New Generation Solar Cells
  41. Altmetric Badge
    Chapter 40 On Recent Development in Two-Dimensional Transition Metal Dichalcolgenides for Applications in Hydrogen Evolution Reaction
  42. Altmetric Badge
    Chapter 41 Photoabsorbers with Hybrid Organic–Inorganic Structures for Optoelectronics and Solar Cells
  43. Altmetric Badge
    Chapter 42 Simulating Microstructure Evolution in Ni-YSZ Electrodes of Solid Oxide Cells Under Operating Conditions
  44. Altmetric Badge
    Chapter 43 Study on a Short Process Method for Preparation of 3.5 Valence Vanadium Electrolyte
  45. Altmetric Badge
    Chapter 44 Thermoelectric Generators System Made with Low-Cost Thermoelectric Modules for Low Temperature Waste Heat Recovery
  46. Altmetric Badge
    Chapter 45 In Situ Observation and Investigation of the Wetting Behaviors of Mold Flux on Steel Substrate
  47. Altmetric Badge
    Chapter 46 Investigation of Echo Source and Signal Deterioration in Ultrasound Measurement of Metal Melt
  48. Altmetric Badge
    Chapter 47 Real-Time Quantification of Nickel, Cobalt, and Manganese Concentration Using Ultraviolet–Visible Spectroscopy—A Feasibility Study
  49. Altmetric Badge
    Chapter 48 Salt-Assisted Chemical Vapor Deposition Synthesis of 2D WSe2 and Its Integration in High Performance Field-Effect Transistors
  50. Altmetric Badge
    Chapter 49 Additive Manufacturing of Natural Materials as a Multidisciplinary Approach in Engineering Education
  51. Altmetric Badge
    Chapter 50 Development of a High Entropy Alloy Al X (CoCrCuFeNi) 1-X for Diverse Security Applications
  52. Altmetric Badge
    Chapter 51 Catalytic Pyrolysis of Polyethylene and Polypropylene Over Y Zeolite
  53. Altmetric Badge
    Chapter 52 Cold Sintering of Iron Powdered Metal Compacts and Their Performance
  54. Altmetric Badge
    Chapter 53 Design of New High Entropy Ceramics in the Pseudo-Binary System RGaO 3 -R 2 Ti 2 O 7
  55. Altmetric Badge
    Chapter 54 Determination of Structuralers of Type Solid Solutions Ba 1–3X Gd 2X Ti 1–3X Eu 4X O 3. (X = 0.1, 0.15, 0.3, and 0.6% by Weight)
  56. Altmetric Badge
    Chapter 55 Preparation of V 2 AlC Phase Material by Aluminum, Graphite, and V 2 O 5 Precursor
  57. Altmetric Badge
    Chapter 56 Synthesis and Optimization of BiFeO 3 and La-Doped BiFeO 3 Prepared by the Solid State Reaction Method
  58. Altmetric Badge
    Chapter 57 The Effect of Particle Size on the Morphology of Polyester and Epoxy-Based Auto-Hybrid Composites
  59. Altmetric Badge
    Chapter 58 Thermodynamic Analysis of CaO in the Preparation of Fe/FeAl 2 O 4 by Fe 2 O 3 -Al 2 O 3 Electrolysis
  60. Altmetric Badge
    Chapter 59 An Electrochemical Study of Ferrous and Nonferrous Materials in an Engine Coolant Environment
  61. Altmetric Badge
    Chapter 60 An Investigation of the Microstructure and Oil Retention of Electrolyte Jet Plasma Oxidation (EJPO) Coating
  62. Altmetric Badge
    Chapter 61 Electrochemical Corrosion Tests of Aluminum 1100 Alloy Coupons in Acid Condensate Environment
  63. Altmetric Badge
    Chapter 62 Electrochemical Study of Stainless Steels in Diesel Exhaust Fluid (DEF) and Simulated Exhaust Acid Condensate Environments
  64. Altmetric Badge
    Chapter 63 A Review on Impact Resistance of Partially Filled 3D Printed Titanium Matrix Composite Designed Aircraft Turbine Engine Fan Blade
  65. Altmetric Badge
    Chapter 64 Microstructural Evolution and Mechanical Properties of Additively Manufactured Commercially-Pure Grade 2 Titanium After Post-process Heat Treatment
  66. Altmetric Badge
    Chapter 65 Preparation of TiAl Alloy by Magnesium Aluminum Synergistic Reduction of TiO 2 in Molten Salt Medium
  67. Altmetric Badge
    Chapter 66 Investigating the Suitability of Tableau Dashboards and Decision Trees for Particulate Materials Science and Engineering Data Analysis
  68. Altmetric Badge
    Chapter 67 A Finite Difference Analysis of the Effect of Graphene Additions on the Electrical Conductivity of Polycrystalline Copper
  69. Altmetric Badge
    Chapter 68 Clustering Algorithms for Nanomechanical Property Mapping and Resultant Microstructural Constituent and Phase Quantification
  70. Altmetric Badge
    Chapter 69 Biodegradable Superabsorbent Polymers
  71. Altmetric Badge
    Chapter 70 Characterization of Multi-walled Carbon Nanotube Reinforced into Poly(3-Hydroxybutyrate-Co-3-Hydroxyvalerate) (PHBV)-Epoxidized Natural Rubber 50 (ENR50) Biofilms
  72. Altmetric Badge
    Chapter 71 Deep Learning and Finite Element Method Towards the Application of Microfracture Analysis for Prevention of Fatigue Fractures in Bones
  73. Altmetric Badge
    Chapter 72 Effect of Suppressing Pressure on the Properties of AZ91 Foamed Magnesium Alloy
  74. Altmetric Badge
    Chapter 73 Fabrication and Characterisation of Two-Layered Synthetic Titanium-Chitosan Bone Scaffolds
  75. Altmetric Badge
    Chapter 74 Investigation of Effect of the Urea Content on the Pore Morphology, Porosity, and Mechanical Behavior of Porous Ti
  76. Altmetric Badge
    Chapter 75 Polymer Interfaces with Small-Scale Biological Systems and the Impact on Sperm Viability
  77. Altmetric Badge
    Chapter 76 Effect of Holding Time on the Properties of AZ91 Foamed Magnesium Alloy
  78. Altmetric Badge
    Chapter 77 Cadmium (II) Removal from Aqueous Solution by Magnetic Biochar Composite Produced from KOH-Modified Poplar Sawdust Biochar
  79. Altmetric Badge
    Chapter 78 Characterization on the Electrochemical Property of the Ion Flotation Sludges After Thermal Treatment
  80. Altmetric Badge
    Chapter 79 Effect of Thermal Conductivity on the Mechanical Behavior of Marginal Construction Waste as a Structural Material for Recycled Pavements
  81. Altmetric Badge
    Chapter 80 Efficient Removal of Molybdenum from Ultra-Low Concentration Solutions via Fe(III) Chelating Precipitation: Precipitation Sludge for MoFe Alloy Production via the Metallothermic Reduction
  82. Altmetric Badge
    Chapter 81 Performance for the Treatment of SO 2 and NO in Sintering Flue Gas of the Novel Adsorbent Prepared Under Microwave Field
  83. Altmetric Badge
    Chapter 82 Removal of Fluoride from Aqueous Solution by NH 2 -MIL-101(Al)
  84. Altmetric Badge
    Chapter 83 Study on the Application of Modified MOFs to the Treatment of Simulated Metallurgical Wastewater
  85. Altmetric Badge
    Chapter 84 The Formation of Schwertmannite and Its Influence on Mine Environment
  86. Altmetric Badge
    Chapter 85 Preparation of Coal Liquefaction Residue-PAN Composite Carbon Nanofibers by Electrostatic Spinning
  87. Altmetric Badge
    Chapter 86 3D Construction Based on Nephogram Slices of Simulated Results
  88. Altmetric Badge
    Chapter 87 A CFD Simulation Investigation of Microbubble Generation and Movement During the Mineral Flotation Process
  89. Altmetric Badge
    Chapter 88 A Tailor-Made Experimental Setup for Thermogravimetric Analysis of the Hydrogen- and Carbon Monoxide-Based Reduction of Iron (III) Oxide (Fe 2 O 3 ) and Zinc Ferrite (ZnOFe 2 O 3 )
  90. Altmetric Badge
    Chapter 89 Grain Precipitation and Growth Model of TiN Inclusions in 22MnB5 Steel
  91. Altmetric Badge
    Chapter 90 Multi-Physics Modelling of Additively Manufactured Cellular Structures Using Selective Laser Melting
  92. Altmetric Badge
    Chapter 91 Simulation of Steam Film Motion Process on the Surface of Zirconium Alloy Rod
  93. Altmetric Badge
    Chapter 92 Thermodynamic Assessment of the SiO 2 -Y 2 O 3 System
  94. Altmetric Badge
    Chapter 93 Characterization of Second Phase Particles in Twin-Roll Cast Aluminum Alloy AA 8011
  95. Altmetric Badge
    Chapter 94 Effect of Build Height on Micro-cracking of Additively Manufactured Superalloy RENÉ 108 Thin-Wall Components
  96. Altmetric Badge
    Chapter 95 Elucidating the Relationship Between Arc Behavior and Solidification Defects During Vacuum Arc Remelting of Superalloys
  97. Altmetric Badge
    Chapter 96 Evolution of Microstructure and Mechanical Properties of the As-Cast 1030B Al Sheet During Ultrasound-Assisted Continuous Casting
  98. Altmetric Badge
    Chapter 97 Evolution of Physicochemical Properties of Tundish Covering Flux in Continuous Casting Process
  99. Altmetric Badge
    Chapter 98 Experimental Research on Dephosphorization of Mn-Si Alloys Based on CaO-CaF 2 Slag System
  100. Altmetric Badge
    Chapter 99 Hybrid Additive Manufacturing of Island Grain Bicrystals
  101. Altmetric Badge
    Chapter 100 Research Progress of Composite Preparation Technology of Bimetallic Wire
  102. Altmetric Badge
    Chapter 101 Uncertainty Quantification of Model Predictions Due to Fluid Flow in Laser Powder Bed Fusion of IN625
  103. Altmetric Badge
    Chapter 102 Microstructure and Mechanical Properties of Rotary Friction Welded IN-600 and SS316L with Copper Interlayer
  104. Altmetric Badge
    Chapter 103 Role of the Aging Treatment in the Microstructure Evolution and Mechanical Properties of Cu/Sn-Bi-Ag-In/Cu Joint
  105. Altmetric Badge
    Chapter 104 Wire Bonding Novel 3D Air-Metal Dielectric Structures with ISIG Passivation: Process Development and Reliability
  106. Altmetric Badge
    Chapter 105 Development of Aluminum-Based Dissolvable Alloys for Hydraulic Fracturing Applications
  107. Altmetric Badge
    Chapter 106 Atomistic Study on Diffusion and Trapping of Hydrogen in Nanocrystalline Steel
  108. Altmetric Badge
    Chapter 107 Hydrogen-Induced Cracking of Pure Titanium in Hydrochloric and Sulfuric Acid Solutions Using Constant Load Method
  109. Altmetric Badge
    Chapter 108 Stress Corrosion Cracking Study of Fe 39 Mn 20 Co 20 Cr 15 Si 5 Al 1 (at.%) Compositionally Complex Alloy in 3.5 wt% NaCl Salt Solution
  110. Altmetric Badge
    Chapter 109 Tear Resistance of AA7075-T6 Sheet at Room Temperature and 200 °C
  111. Altmetric Badge
    Chapter 110 MoS 2 Thermoelectrics for Sustainable Energy
  112. Altmetric Badge
    Chapter 111 Nanostructured Materials: A Review on Its Application in Water Treatment
  113. Altmetric Badge
    Chapter 112 Photoabsorbers with 2D Layered Perovskites for Bendable Optoelectronics and Solar Cells
  114. Altmetric Badge
    Chapter 113 Non-metallic Precipitates Evolution Mechanism of Fe-3.0wt%Si Steel
  115. Altmetric Badge
    Chapter 114 Small-Scale Rapid Alloy Prototyping of Extra-Low Carbon Steel to Investigate the Effects of Cu and Cr Residuals
  116. Altmetric Badge
    Chapter 115 Thermodynamic Analysis of Fe Reduction by LiFePO 4 in Melts Electrolysis
  117. Altmetric Badge
    Chapter 116 Thermodynamic Analysis of FeSi/Fe 3 Si Intermetallic Prepared from Copper Slag by Electrochemical Method
  118. Altmetric Badge
    Chapter 117 Thermodynamics of Fe Reduction in Melts Electrolysis
  119. Altmetric Badge
    Chapter 118 Effect of Ultra-High Deformation Process on Micro-Structure and Properties of Cu-0.7 wt.% Ag Wires
  120. Altmetric Badge
    Chapter 119 Effect of Welding Current on Liquid Metal Embrittlement of the Resistance Spot Welded Galvanized QP980 Advanced High-Strength Steel
  121. Altmetric Badge
    Chapter 120 Experimental Determination of Forming Limit Diagram for AISI 304
  122. Altmetric Badge
    Chapter 121 Effect of Nozzle Structure Parameters on Liquid Steel Flow Behavior in Slab Mold
  123. Altmetric Badge
    Chapter 122 Influence of Single Fold and Double Fold on the Stress and Strain of AMOLED Module
  124. Altmetric Badge
    Chapter 123 Mg–Al-Layered Double Hydroxide Doped with Phosphate Radical for Preparation of Slow-Release Phosphate Fertilizers
  125. Altmetric Badge
    Chapter 124 Numerical Simulation of Flow Distribution System in Molten Pool of Twin Roll Strip
  126. Altmetric Badge
    Chapter 125 Preparation of Polydopamine-Mesoporous Silica Nano-Fertilizer Loaded with Multiple Nutrients for Crops Planting
  127. Altmetric Badge
    Chapter 126 Measuring Cool Touch of Key Sports Performance Apparel T-Shirt Materials Using a Modified Transient Plane Source (MTPS) Sensor to Inform Future Technology Development
  128. Altmetric Badge
    Chapter 127 “Stuck on You”: Functional Friction Measurements of Doctored Baseballs Coated with “Sticky Substances”
  129. Altmetric Badge
    Chapter 128 Impact Fretting Wear Behavior of Cr-Alloy Coating Layer for Accident-Tolerant Fuel Cladding
  130. Altmetric Badge
    Chapter 129 Study of Microstructure, Hydrogen Solubility, and Corrosion of Ta-Modified Zr–1Nb Alloys for Nuclear Applications
  131. Altmetric Badge
    Chapter 130 Molecular Dynamics Simulations on Nanosuspension Droplet Impact
  132. Altmetric Badge
    Chapter 131 Solution-Processed Perovskite Photoabsorbers with Mixed Cations for Improved Stability in Solar Cells
  133. Altmetric Badge
    Chapter 132 Investigation of Thermal Properties and Thermal Reliability of Ga-based Low Melting Temperature Alloys as Thermal Interface Materials (TIMs)
  134. Altmetric Badge
    Chapter 133 Dissolution of Carbides in HAZ During NG-TIG Welding for Alloy 617/9%Cr Dissimilar Welded Joint
  135. Altmetric Badge
    Chapter 134 Effect of Changes in Phase and Grain Interface on Physical Properties During Aging of Ultra-Deformation Cu-Ag Alloy Wires
  136. Altmetric Badge
    Chapter 135 Effect of Electron Spin Fluctuation on the Magnetism and Elastic Properties of the Slab Matrix Phase
  137. Altmetric Badge
    Chapter 136 In Situ Observation of Coupled Growth Morphologies in Organic Peritectics Under Pure Diffusion Conditions
  138. Altmetric Badge
    Chapter 137 Microstructure Evolution of HP40 and HK40 Steels After Isothermal Aging
  139. Altmetric Badge
    Chapter 138 Precipitation Process During Isothermal Aging of an Austenitic Stainless Fe-12Cr-10Mn-12Ni-5Mo-0.24 N-0.03C Steel and Its Effect on the Mechanical Properties
  140. Altmetric Badge
    Chapter 139 Characterization of Gas Atomized Nickel Silicide Powder for Additive Manufacturing with Varying Silicon Content
  141. Altmetric Badge
    Chapter 140 Analysis of Additive Manufacturing Powders’ Behaviors Using Discrete Element Method-Based Simulation
  142. Altmetric Badge
    Chapter 141 Preparation and Characterization of Spherical Nickel Silicide Powder by Inductively Coupled Plasma Spheroidization for Additive Manufacturing
  143. Altmetric Badge
    Chapter 142 Thermodynamic Analysis and Synthesis of V 2 AlC Phase Material
  144. Altmetric Badge
    Chapter 143 A Comparative Study on Supercapacitors Formed with Different Graphene-Based Hybrid Nanostructured Materials
  145. Altmetric Badge
    Chapter 144 Effect of Dichloroethane on the Electronic Transport Behavior in Semiconducting MoS 2
  146. Altmetric Badge
    Chapter 145 Platinum-Based Superalloys: Combating High Temperatures and Aggressive Environments
  147. Altmetric Badge
    Chapter 146 Effect of Hydrogen on Creep Properties
  148. Altmetric Badge
    Chapter 147 High-Stiffness Metamaterial Composite Structure with Plate-Reinforced Strut-Microlattice
  149. Altmetric Badge
    Chapter 148 Enhancing Mechanical Performance of a Commercial Al Alloy by Tailoring Their Microstructural Heterogeneity
  150. Altmetric Badge
    Chapter 149 The Role of the Heterogenous Structure on the Mechanical Properties of Additively Manufactured AlSi10Mg Alloys
  151. Altmetric Badge
    Chapter 150 Correction to: Design of New High Entropy Ceramics in the Pseudo-Binary System RGaO 3 -R 2 Ti 2 O 7
Attention for Chapter 18: The Study on Microstructural Evolution During Post-processing of Additively Manufactured Ti64
Altmetric Badge

Mentioned by

twitter
1 X user

Citations

dimensions_citation
2 Dimensions

Readers on

mendeley
1 Mendeley
Summary X Dimensions citations
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Chapter title
The Study on Microstructural Evolution During Post-processing of Additively Manufactured Ti64
Chapter number 18
Book title
TMS 2022 151st Annual Meeting & Exhibition Supplemental Proceedings
Published in
TMS 2022 151st Annual Meeting & Exhibition Supplemental Proceedings, January 2022
DOI 10.1007/978-3-030-92381-5_18
Book ISBNs
978-3-03-092380-8, 978-3-03-092381-5
Authors

Bryan Naab, Denis P. Dowling, Mert Celikin, Naab, Bryan, Dowling, Denis P., Celikin, Mert

View on publisher site
X Demographics

X Demographics

The data shown below were collected from the profile of 1 X user who shared this research output. Click here to find out more about how the information was compiled.

This page is provided by Altmetric.