↓ Skip to main content

Advances in Materials, Mechanics and Manufacturing II

Overview of attention for book
Cover of 'Advances in Materials, Mechanics and Manufacturing II'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 Prediction Efficiency of the Ultimate Load Capacity of Nut Thread with Insufficient Engagement Length
  3. Altmetric Badge
    Chapter 2 Cement Reduction and Strength Development of Conventional Mortars by Utilization of Dried Waste Marble Slurry
  4. Altmetric Badge
    Chapter 3 Experimental Analysis of the Crushing of Auxetic Structure Under Compression
  5. Altmetric Badge
    Chapter 4 System Level Specification and Multi-agent Simulation of Manufacturing Systems
  6. Altmetric Badge
    Chapter 5 On the Visco-Hyperelasticity Relationship in Modeling Styrene Butadiene Rubber Under Uniaxial Cyclic Loadings: Experiments and Parameter Identification
  7. Altmetric Badge
    Chapter 6 Analysis of the Wells Turbine Structure of an Oscillating Water Column Wave Energy System
  8. Altmetric Badge
    Chapter 7 A Two-Stage Approach to Solve Structural Damage Detection Problem in Plate Structures
  9. Altmetric Badge
    Chapter 8 Experimental Analysis of the Dynamic Behavior of a Sandwich with a Bio-Based Auxetic Core
  10. Altmetric Badge
    Chapter 9 Numerical Analysis of Entropy Generation Inside the Diesel Injector
  11. Altmetric Badge
    Chapter 10 Assessment of Surface Integrity and Dust While Drilling of GLARE® FMLs
  12. Altmetric Badge
    Chapter 11 An Adaptative Differential Evolution Algorithm for Vibration Level Reduction in Rotordynamics
  13. Altmetric Badge
    Chapter 12 Nano-heat Transfer in GAAFET Transistor Using Single-Phase-Lag Model
  14. Altmetric Badge
    Chapter 13 Hydrodynamics Flow in an Exocentric Input Dome T-Mixer (DTM)
  15. Altmetric Badge
    Chapter 14 3D Simulation of Two Stages Solar Tower
  16. Altmetric Badge
    Chapter 15 A New Approach to Evaluate and Predict System Obsolescence: Mathematical Formulation
  17. Altmetric Badge
    Chapter 16 Transient Response of Functionally Graded Porous Plate
  18. Altmetric Badge
    Chapter 17 Water Aging Effect on the Vibration Behavior of the Bio-Based Flax/PLA Composites
  19. Altmetric Badge
    Chapter 18 An Anisotropic Model with Linear Perturbation Technique to Predict HCP Sheet Metal Ductility Limit
  20. Altmetric Badge
    Chapter 19 Effect of Air-Gas Blend and Compression Ratio on Piston Behavior for Hydrogen-Enriched LPG Engine; Numerical Study
  21. Altmetric Badge
    Chapter 20 Dynamic Modeling of Differential Bevel Gear with Uncertain-but-Bounded Parameters
  22. Altmetric Badge
    Chapter 21 Analysis of Geometrically Nonlinear Responses of Smart FG Cylindrical Shell
  23. Altmetric Badge
    Chapter 22 Finite Rotation RPIM Formulation for Geometrically Nonlinear Analysis of FG-CNTRC Shell Structure
  24. Altmetric Badge
    Chapter 23 Numerical Investigation on Incremental Forming Process of an Elastoplastic Functionally Graded Material
  25. Altmetric Badge
    Chapter 24 Simulation of the Effects of Heat Introduced During Combustion on SI Engine Performance
  26. Altmetric Badge
    Chapter 25 Fracture Toughness Resistance and Mechanical Tensile Properties of Cold Rolled CuZn30 Brass Alloy
  27. Altmetric Badge
    Chapter 26 Manufacturing of Sandwich Structure with Recycled Flax/Elium Skins
  28. Altmetric Badge
    Chapter 27 Thermal Performance Comparison of Various Concentrating Solar Water Heating Systems
  29. Altmetric Badge
    Chapter 28 The Pre-strain Impact on Tensile Properties and Fracture Toughness of AA5754-H111 Aluminum Alloy
  30. Altmetric Badge
    Chapter 29 Disassembly Sequence Optimization for Profit and Energy Consumption Using Petri Nets and Particle Swarm Optimization
  31. Altmetric Badge
    Chapter 30 Numerical Model for Intake System in SI Engine
  32. Altmetric Badge
    Chapter 31 Optimization of the Electrical Energy Consumed by a Machine Tool for a Coupled and Uncoupled Cutting System
  33. Altmetric Badge
    Chapter 32 Quasi-static Study of Gear Mesh Stiffness of a Polymer-Metallic Spur Gear System
  34. Altmetric Badge
    Chapter 33 Combined Approach for Modeling Progressive Damage in Unidirectional CFRP Composites
  35. Altmetric Badge
    Chapter 34 Impact of Venturi Shape on Performance of Solar Chimney Power Plant
  36. Altmetric Badge
    Chapter 35 Parametric Analysis of Steel Cutting Using Johnson and Cook Model
  37. Altmetric Badge
    Chapter 36 Experimental Study and Measurement of Vehicle Interior Vibration
  38. Altmetric Badge
    Chapter 37 Design Discussion of a Mobile and Intelligent Infrared Detector for the Measurement of the Air Quality Index
  39. Altmetric Badge
    Chapter 38 Electro-Thermomechanical Modelling of a BGA Assembly Subjected to a Damaging Displacement and to Random Vibrations
  40. Altmetric Badge
    Chapter 39 Predicting of Particle Exhaust-Emissions from Urban Road Traffic Using Artificial Neural Networks (ANNs)
  41. Altmetric Badge
    Chapter 40 Thermo-hydraulic Study of an Air/R22 Tubular Evaporator: Application of the Superposition Model
  42. Altmetric Badge
    Chapter 41 Aluminum Alloy Chips Regeneration by Sintering
  43. Altmetric Badge
    Chapter 42 Numerical Study of Elastic Properties of Porosity Controlled Flax/PP Nonwoven Composite
  44. Altmetric Badge
    Chapter 43 Analysis of Geometrically Necessary Dislocations Density in the Vicinity of Grain Boundaries by Atomic Force Microscope Topography for 316L Austenetic Stainless Steel
  45. Altmetric Badge
    Chapter 44 Studies on Elastic Properties of Recycled Concrete by Micromechanical Modeling
Overall attention for this book and its chapters
Altmetric Badge

Mentioned by

twitter
1 X user
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Title
Advances in Materials, Mechanics and Manufacturing II
Published by
Springer International Publishing, January 2022
DOI 10.1007/978-3-030-84958-0
ISBNs
978-3-03-084957-3, 978-3-03-084958-0
Editors

Mounir Ben Amar, Anas Bouguecha, Elhem Ghorbel, Aberrahim El Mahi, Fakher Chaari, Mohamed Haddar

X Demographics

X Demographics

The data shown below were collected from the profile of 1 X user who shared this research output. Click here to find out more about how the information was compiled.